So how does the ABox Mk2 stack up against the 2B for audio play?

I really enjoyed reviewing the ABox Mk2 for E-Stim Systems. It is a totally redesigned upgrade of their original Audio Stim box the ABox which came to the marketplace in 2006.

It is great to see that E-Stim Systems are continually improving their range of control boxes. Here is a link to my review of the ABox Mk2.

The ABox Mk2 is a single channel control box with two modes of operation, and these are line in and its internal microphone.

Almost immediately after publishing my review of the ABox Mk2, I started to receive messages and enquiries about how it compares to the E-Stim Systems 2B.

So that brings me to this article. I have spent the day playing with both boxes side by side, comparing both, it was tough to compare them.

We are reviewing two new sex toys for So Divine

While Stunt Cock and sub'r' were at the office messing around as they usually are (in all honesty they were installing a new webcam for me) they received a delivery from So Divine.

They let me know and suggested making a quick unboxing video to test the new camera out. I thought that was a great idea and so I told them to go for it.

Rachel got a nice surprise after moving abroad - Part 2

After spending a week having erotic dreams of my first experience, I decided that I needed more. I had kept the phone numbers of the two studs that I had played with and decided to give them both a call.

I was very nervous about meeting them again. So I suggested we meet for drinks and a chat, after all, I did not want to either lead them on or put myself in a difficult situation.

We agreed to meet in a local hotel bar, that evening. Now, of course, the next challenge was what to wear. Going through the small selection of clothes I had brought with me, I selected my favourite black lace bra and g string set. I paired it with a gorgeous red silk dress; it was skin tight and was short enough to just about cover my butt cheeks. Then came the black lace top stockings and red heels. I wanted to impress and turn heads, and I think that this will do the trick.

Even though I had dressed to impress, I was still very nervous and ended up at the bar 20 minutes early. I did gain some confidence when I saw how many pairs of eyes followed me across the room, and the barman was waiting for my order as soon as I reached him. I was sat at the bar, enjoying my drink for just a few minutes before I saw the two men I was meeting enter the bar. I watched them look around the room for me, then their eyes lit up, and a very enticing smile graced both their faces.

As they approached, I decided that I was going to enjoy my evening, and gave them both a sultry kiss, while running my hands down their back to grip their bottoms. Clasping both their hands, I proceeded to lead them to an empty booth in the corner.

It's update time on my overly ambitious 3D printer enclosure

Well, I thought it was high time to give an update on my 3D printer enclosure at my office. Having just spent a week in hospital (long story) I am well behind where I would like to be in the build, but basically, it is all operational.

If you missed the first post in this series you can read it here - 3D Printer Enclosure.

I am waiting on the doors coming from a supplier that is cutting them to size for me (I pray that I measured them correctly).

I have magnetic reed switched to use on the doors so that if you open the main enclosure doors (either side), it will switch the LED lighting on to 100% white light so I can see what I am doing. Closing the doors resets the lights back to what they were doing before the door was opened.

Lighting

The LED lighting is fitted, with a 72 RGB LED strip in the top shelf area and also one in the main enclosure, and they look incredible when the printer enclosure is powered up.

I can select different lighting colours or have it slowly cycling through the entire colour spectrum. It even has some cool modes called breath and heartbeat. I will post a video of those when the doors arrive.

Hell yes it is, and in this article I'll tell you why

Recently, as a result of a conversation with a Dutch Fetlifer, I started to wonder how many penis owners who stim use additional stimulation during their sessions.

I often incorporate vibrator play in my sessions and naturally assumed that lots of penis owners do too. But having looked around popular places for discussing e-stim like SmartStim and SocialStim, it appears I may be mistaken in that assumption.

That got me thinking as to why that would be?

It also got me curious as to just how good combining e-stim play with vibrations would feel on a hard (or indeed soft) cock.

Some quick pointers on stimming your prostate with insertables

Here is something for the prostate owners out there who love their e-stim play and want to target their prostate more effectively.

Now I know that most prostate owners use butt plug style electrodes to target their prostates, and that makes total sense.

I mean, by wiring up the head of a bipolar insertable electrode like the Moaner you can then attach the other end of your cable to something like a cock loop or monopole pad electrode.

This (in theory) will allow you to send the electrical pulses from your e-stim control box through your prostate and along your Dorsal nerves to stimulate both the glans of a penis and the prostate itself - perfect.

I want to make some things out of ABS and so I need to up my game a bit

I am a sucker for a project (or two). I love tweaking my 3D printers to get the best possible quality I can out of them, and I have learned so much through doing so.

My next printer project is going to be constructing an enclosure for two of them. This will tidy my office up somewhat, but also it will allow me to experiment with printing with some other materials.

I am going to be printing in PETG first, and then I will be experimenting with ABS as a material for my products. Both of these are more difficult to print than my usual PLA with ABS having the most challenges to overcome.

So read on to find out why and how I am going to tackle this project.

If estim cock play is your thing then I have designed something you may enjoy

Well, I have done it again. After a rather erotic dream about using e-stim on a bound and gagged submissive, where I was using a bipolar cock loop on it, I decided to sketch what I was using in the dream.

Now obviously this isn't a groundbreaking new design and other similar designs are available on the market. None of them can be printed and made yourself if you have access to a 3D printer.

Of course, I can step in and make one for you if you don't have access to a decent 3D printer.

Looking for a fantastic range of sex machines? Check out Cartel De Amore

It is no secret that I love sex and fucking machines in general, relishing the sheer power and performance of them. They never tire, slow or falter, a fucking machine has one job, and it is designed to do it exceptionally well.

But, where can you get one from? What sort of machines are best suited to my circumstances? These are questions that I often get asked, and in this sponsored post, I am going to point you to a company that can take care of your every fucking and sex machine needs. Let me introduce you to Cartel De Amore, based in Anaheim, California.

"Be sure to check out the machines over at Cartel De Amore, and don't forget to tell them that Joanne says "Hi""

Joanne

They carry a fantastic range of sex machines as well as all the attachments that you can think of to enhance your experience. With so many sex machines to choose from, it can be hard to sort out what would be the best option for you. So, in my usual style, I'm going to break them down into a few categories and make some recommendations for you to think about.

This article will cover standard fucking machines, vibrating sex machines, male milking machines and some recommendations on attachments.

I am working on some pretty neat designs and products

I have been designing and making 3D printable electrodes and more importantly, electrode insulators for over a year now.

Over that time, my skills and knowledge about not only designing these items but enabling the designs to be easily printed on hobby-level 3D printers have improved considerably.

I still release my designs to the community for free personal use as I am a big believer of giving back to the community.

I also sell ready-made insulators and the funds from these products helps me run my site and also upgrade my equipment so that I can create even better and more intricate kink and e-stim products.

I have upgraded my Ender 3 printer to a direct drive system, it is now controlled by a 32-bit processor making it better in almost every way.

One of my reasons for upgrading from the standard bowden drive system for the filament to a direct drive system is so I can use some really nice materials.

Rachel got a nice surprise after moving abroad

Hello, my name is Rachel, I would like to tell you about something that happened to me recently. After receiving a promotion at work, I needed to move to another country. I was both scared and excited at the prospect at the new job and a new country to explore on my own.

I travelled by plane, limited to just one small case, with the rest of my belongings would be transported by land.

As I didn't want to risk taking any of my favourite sex toys, "just in case". I thought that having only a couple of weeks with my fingers for company wouldn't be a problem. Plus, I could always look to buy something when I arrived at my new home to tide me over as it were.

I was given one month to settle in before I would start work. With nothing to do as yet, I decided that it would be a great idea to spend a few days getting to know the area. While exploring, I was surprised to find what looked like a small sex shop.

Although I had taken some language classes, I wanted to be sure this was a sex toy shop and not a brothel. So I watched the entrance for a while and saw plenty of couples, single men and women come and go from the store carrying shopping bags. This gave me the confidence to see what was on offer inside.

If you want to introduce your partner to e-stim then read on

So, here's the premise, you love e-stim. Stimming is one of your favourite ways of getting off, the hands-free orgasms blow you away, and you want to share your excitement about this masturbatory practice with your partner.

But how do you broach the subject without scaring them off? That is the million-dollar question and one that I will be discussing in this article.

Now that title may have you a little confused but bear with me on this one as this is a serious subject.

I am talking about STI's (Sexually Transmitted Infections) here, and this lockdown may be a blessing in disguise for the swinging community and just everyone who is sexually active.

All STI's have a gestation period before symptoms arise, and often the infection can be spread between partners before symptoms occur. The lockdown, we are in as a nation, has pretty much stopped people having sex with new partners. That is a good thing regarding STI spread.

Think about it for a minute, with people not freely engaging sexually with new partners we are not only stopping the spread of Coronavirus, but we are also not spreading HIV and all of the other STI's that plague humanity.

Guest Post

I am delighted to be able to introduce the fantastic Peroxide.

PeroxidePeroxide
Peroxide has been writing a Kink/Relationship/Lifestyle Blog called Submissive in Seattle since 2011. He live in Seattle, Wa (who would have guessed) with his partner and Dominant.

Follow his adventures on his Twitter account @Peroxide__, on Fetlife or at SubmissiveInSeattle.com

I am upping my game so I can make some even kinkier things

I have so many projects and ideas rushing around in my head at the moment. Anyone who follows my site and the kinky things I get up to will be well aware of my love of designing electrodes and kinky things. I am a total geek at heart LOL.

I have no formal education in anything like this. While the designs I come up with look polished, it takes me days to perfect something I have decided to model in 3D. I use Fusion360 to design my bits and bobs and the learning curve on that was like the North Face of the Eiger. Here is a link to the first thing I ever designed and it took forever - Bumble Bee Pussy Clamp Electrode.

I am self-taught, which is nothing new there. When I was introduced to the beautiful world of e-stim play, I pretty much fumbled my way around. I taught myself how to give myself hands-free orgasms reliably. That is one of the reasons why I write so many e-stim articles and advice guides. They hopefully help others coming into the scene to find it easier to reach their first HFO.

The Sex Blogging Community Can Be So Much More

It's time for me to sit here and place my thoughts in front of the whole world as to what is currently happening in the sex blogging community.

The sex blogging community should be a beacon of mutual acceptance and understanding. But it is a beacon with a weak flickering flame, one that will not go out but still a beacon that falls short of its true potential.

As an open community, we had the opportunity to accept and welcome all genders, colours, sizes and shapes, but recent events have highlighted how this is not truly the case.

Stereostim is a great way to enjoy stimming some fun

Recently Electrastim, a UK manufacturer of some brilliant E-Stim Control boxes such as their AXIS (read my review of it here) and the FLUX started to produce some excellent estim videos.

On social media, they asked if there was anything in particular people would like to see explained in these videos. Well being a gobby cow (in the most delightful way), I had to ask about a quick primer on stereo-stim or using audio files when stimming. It's often a subject that causes lots of confusion to people new to stimming.

Imagine my delight when they did produce an excellent video on this subject. They even gave me a shout out in it too, thank you Electrastim.

I am doing my own little bit to help keep NHS staff safe by making PPE for them

With the pandemic running its cause all over the globe, healthcare professionals are at the front lines of the battle against this virulent foe. Here in the UK, we are incredibly proud of all the NHS staff and critical workers doing their bit to keep everyone safe and sound.

The NHS staff, in particular, are in harm's way, caring for patients with Covid-19, and they rely on personal protective equipment (PPE) to keep them safe.

This vital equipment is becoming in short supply, and small businesses and individuals who can help are rallying to the cause.

Fibromyalgia is a condition that causes widespread pain and extreme tiredness.

Ok, so the first thing I need to say is that most people with Fibromyalgia may have different symptoms. This post details my struggle with it and how I cope. There is no cure or easy solution to the constant pain, stiffness and other symptoms, and it's undoubtedly not something that I would wish on anyone.

In some respects, I am quite lucky though, while I'm on a lot of pain meds and do walk with crutches, or need to use a wheelchair over longer distances. I can still walk with crutches, and the pain meds do help slightly, and I also only suffer from mild fibro-fog (yes, that is a real term).

Luckily the fibro-fog is something that is not a constant for me, so I can just stop writing, and come back later to finish and edit what I am working on as needed.

More inspiration from Deviant Designs

I am in awe of Deviant Designs; he produces the most incredibly kinky and deviant projects that he uses on the lovely MistressKrush.

I always recommend checking out his site, social media accounts and of course his Patreon account. Consider subscribing if you want a peek behind the scenes and access to the latest news, videos and posts about his kinky creations.

I want to tell you all about one of his latest creations and how it has spurred me into designing something like it for myself and sub'r'.

Page 2 of 9